Acoustics of our studio were calculated and designed in a way, to correspond with
newest knowledge about studio room acoustic according to the best experts. Room is
veneered from all sides including ceiling with acoustic absorbing material Rockwool
Acoustic. Walls were built from plasterboard according to acoustic standards. Room
has a trapezoidal shape. Walls are skewed and formed according to the project, which
gives us great acoustics and elimination of straight reflect sounds. In the corners
of a room are built-in bass traps - bass absorbing acoustics panels with almost 100%
absorption of all bass frequencies. Room is professionally acoustic tested and measured
with high-end measuring equipment. Superior acoustics give us also absorbing and
diffusing panels placed on ceiling and all walls, which absorbed high, medium and
bass frequencies, and in a such way maximally stops vibration, reverberation, flutter
echo and unreal frequency distortion of a record due to a bad acoustics. To achieve
the best acoustics characteristics of a studio, we decide to use special sound-dumped
floor with acoustic dumping foam and carpet, which also absorb a lot of lost reflections.
Professionally measured acoustics and superior studio monitors with linear frequency
response Mackie HR824 U.S.A. version, give us absolutely guarantee, that yours record
will be ideal frequently balanced without any strong influences of acoustics or low-quality
monitoring system. Studio monitors Mackie are supported with superior monitors of
brand Bowers & Wilkins, which is a standard in leading mastering studios. Monitors
B&W 602/S3 supports also subwoofer ASW 610 again from Bowers & Wilkins for ideal
covering of full frequency band from 20 Hz to 22 kHz. You can find detailed information
about our equipment in a section equipment.
For final testing of your records we can use standard room with ordinary hi-fi speakers
for listening in ordinary "home" conditions, in which will be listening most of your
auditory.
- 4x built-in bass traps,
- 3x flat absorbing panel on the front wall of a studio,
- 1x sloping ceiling absorbing panel,
- 3x flat diffusers on the sidewalls of a studio,
- 6x so-called plamafon placed on the ceiling,
- 2x acoustic longitudinal body on the back wall of a studio,
- sloping walls, room has trapezoidal shape,
- on the back wall is weighty sound absorbing curtain,
- Ceiling and walls of a studio are veneered with material Rockwool Acoustics made
from fiberglass,
- floor is made from wood and acoustic damping foam with a carpet on top
To achieve best acoustic characteristic of custom-made studio we decide also for
custom-made furniture. Therefore furniture is adapted to room acoustic and with its
ergonomics makes work easily.
For photos of studio construction click here
- CD Mastering
- Vinyl Mastering
- Mastering for digital distribution, for radio, etc ...
